The Nine Gann Course Manuals Compiled by Dr. Baumring contain his selection of excerpts of the clearest presentations of the primary conceptual material necessary for understanding the law of vibration as taught by W. D. Gann.

There are 9 Course Manuals in total, presenting the research material and theoretical foundations of what Baumring taught at each seminar. These contain over 5000 pages of critical information that provides the foundation to understand W. D. Gann's complete scientific system behind the markets.

There are 2 sets of Lecture Notes, one by Dr. Julius Nirenstein and the other by Alfred Friedman, both covering all 9 Seminars Lectures. However, each presents different content according to what the note taker thought to write down, so there are significant and important content differences between them. So, for a serious study, it is best to have BOTH sets of notes for the greatest insight.

This set is the most complete, best organized and best priced collection of Gann's writings available.

It was originally collected by Dr. Jerome Baumring and Donald Mack at the Investment Centre, in an attempt to rediscover Gann's original unaltered text, since the Lambert Gann editions by Billy Jones retyped the original text so that Gann's vs. Billy's edits could not be determined. It has since been reorganized according to Gann's own specifications into specific, focused courses containing intentional groupings of content as Gann intended.

6 Volumes, Scans of 4 Large Transparent Calculators, & Scanned Set of 30 Oversized Charts.

This course contains all of the more easily approachable Stock Market Courses by W. D. Gann, and would be, along with Volume I, the best introduction to Gann's writings.

It gives clear instructions for the most easily applied Mechanical Methods and Trend Following systems that Gann always used to first educate his students in the practice of trading, before he would teach them more advanced techniques of forecasting.

This includes the original Gann Course that Tim Walker's book, How to Trade Like W D Gann, is based upon, and elaborates in detail with charts showing every trade, and the strategy fully explained.

The I-S Method Based on Precise Rules; Goal & Strategy of Capital Growth; 1st Law of Trading; Trade With Trend; Different Types of Trend; Dow Theory; Dunnigan; Square Root Law of Price Changes Only a Tendency, Etc.

This new book by Daniel T. Ferrera develops a theory of how Gann most probably created his Mass Pressure Forecasting Charts.

Of all the Gann forecasting techniques known, the Mass Pressure Formula has been one of the most closely guarded secrets.

In fact, there are very few Gann Experts that even know how to create a Mass Pressure Chart or anything about the nature of its construction. These charts are based entirely on Gann's philosophy that

This book presents a trading manual which will clearly teach anyone, including those with absolutely no prior knowledge of the markets, Gann, or forecasting in general, to successfully trade in any market, beginning with very limited capital, as little as a few thousand dollars.

This book is not esoteric, and is not focused on abstract analytical and theoretical principles, but is totally application orientated, specifically outlining a clear trading strategy incorporating all necessary principles of money management, charting, risk management, swing trading, signal generation, the use of options and much more.

The Works of William Dunnigan are some of the Clearest & most effective examples of the application of Cycle Forecasting to Mechanical Trend Systems.

Baumring felt that Dunnigan's One-Way formula and Franklin Paul Jackson's I-S Method were the two most effective Trading Systems he had see which when followed carefully could produce profits without having to Understand forecasting.

For Those Who Have the New Edition of The One-Way Formula & New Blueprints Edited By Donald Mack, We Have a Supplement Including Just the Stock Market Barometer & Gains In Grains, to Complete the Dunnigan Set.

Daniele Prandelli's Trading Course using Gann's Master Time Factor to create a yearly forecast with directional turning points and 80% accuracy in time projections.

Also includes an advanced trading strategy integrating the PFS Forecasts and Planetary Line activity to trade the S&P 500 on an daily to intermediate term basis very successfully.

Ferrera breaks down the 16 primary component cycles in the Dow Jones Industrial Averages, and recombines them using Excel calculators to create a composite wave model which reproduces with 90% accuracy the last 100 years of market activity.

The course demystifies cycle analysis methods used by the likes of Gann, Hurst, Dewey and teaches how to make cyclical models for any market. Included are models for: DJIA, S&P500, Soybeans, Bonds, Gold, Natural Gas, Australian$, Wheat and more.

He explains all cycle lengths and some possible correlations, but most importantly projects the DJIA 100 years into the future through his DTF Barometer.

The intent of this course is to present, for the first time, the true meaning and mechanics of the Squaring of Price & Time.

It will provide absolute proof that the financial markets are mathematically controlled and predictable.

It will demonstrate that ALL market movement can be categorized into only 9 possible binary cases that will exist in any type of vibrational chart. Because

Part 1 of this study provides a detailed analysis of the entire sequence of 322 trades from 1915-1931 presented in W.D. Gann's US Steel trading course, broken down into clear and concise rules for application in today's markets.

Walker dissects Gann's methodology, reveling deeper rules than are apparent in Gann's thin explanations in his original course.

This Gann Trading Course makes an intensive study of one of Gann's core lesson, called The Method for Trading the Overnight Chart. This lesson, is today published as part of the Mechanical Methods & Systems section of his Stock Market Course, and consists of 9 Rules followed by 15 years of trading examples on US Steel.

This course provides thorough instruction in W.D. Gann’s key trading methodology: Pattern Trading. It teaches “Chart Reading” the way Gann himself did it, demonstrating how to trade the fundamental market patterns identified by Gann.

This strategic approach to trading provides advantages that allow the trader to react to the markets in real-time, without indicator lag. Pattern Trading eliminates lagging mechanical indicators, which are always based on what the market did in the past and not the present. This style of “Form-Reading,” as Gann called it, allows one to make decisions in real time, as the opportunities develop on the chart.

The Works of William Dunnigan are some of the Clearest & most effective examples of the application of Cycle Forecasting to Mechanical Trend Systems.

Baumring felt that Dunnigan's One-Way formula and Franklin Paul Jackson's I-S Method were the two most effective Trading Systems he had see which when followed carefully could produce profits without having to Understand forecasting.

For Those Who Have the New Edition of The One-Way Formula & New Blueprints Edited By Donald Mack, We Have a Supplement Including Just the Stock Market Barometer & Gains In Grains, to Complete the Dunnigan Set.

The I-S Method Based on Precise Rules; Goal & Strategy of Capital Growth; 1st Law of Trading; Trade With Trend; Different Types of Trend; Dow Theory; Dunnigan; Square Root Law of Price Changes Only a Tendency, Etc.

This course contains all of the more easily approachable Stock Market Courses by W. D. Gann, and would be, along with Volume I, the best introduction to Gann's writings.

It gives clear instructions for the most easily applied Mechanical Methods and Trend Following systems that Gann always used to first educate his students in the practice of trading, before he would teach them more advanced techniques of forecasting.

This includes the original Gann Course that Tim Walker's book, How to Trade Like W D Gann, is based upon, and elaborates in detail with charts showing every trade, and the strategy fully explained.

This set is the most complete, best organized and best priced collection of Gann's writings available.

It was originally collected by Dr. Jerome Baumring and Donald Mack at the Investment Centre, in an attempt to rediscover Gann's original unaltered text, since the Lambert Gann editions by Billy Jones retyped the original text so that Gann's vs. Billy's edits could not be determined. It has since been reorganized according to Gann's own specifications into specific, focused courses containing intentional groupings of content as Gann intended.

6 Volumes, Scans of 4 Large Transparent Calculators, & Scanned Set of 30 Oversized Charts.

PANDEMIC SPECIAL: TAKE $1500 EXTRA OFF THE $9000 RETAIL! NOW ONLY $7500! LIMITED TIME! Both Books 1 & 2, Pendulum Motion & Golden Speed from Straker's Universal Golden Keys Series in discounted bulk package.

The Lesson on US Steel covered in Part 1 was not the only lesson that Gann wrote to illustrate his trading methods and teach his students how to be profitable in the markets. There are, in fact, a further six lessons, which show the development of Gann’s teaching over a period of nearly 25 years.

The method remains basically the same, but he made discoveries and additions to it. More importantly, his own ability to put his thoughts into words and examples grew over time. I am therefore very excited to announce that I have written a second book, which will complete the exploration of Gann’s mechanical trading method.

All of the trades, including Gann’s own trades, are illustrated by charts, so that they can be easily followed. There are 150 charts in the book. I believe that anyone who studies these lessons of Gann’s studiously will have the tools to improve their own trading performance immeasurably. These lessons are some of the greatest gems of Gann’s work, for they show us how to turn knowledge into profits.

In this 6-HOUR long Video Seminar, Tim Walker presents a detailed analysis of the many of Gann's trades in U.S. Steel, elaborating subtle points and processes in analyzing the sequential swings of the market. He demonstrates clearly and with many examples how to apply Gann's trading methodology with great effect!

This Seminar was presented in 2016, 2 years after the initial publication of Part 1 of How to Trade Like W.D. Gann, and in it he presents many additional insights that he came to after the completion of publication of Part 1. As such it can be considered an adjunct study with new details and principles that were not thoroughly presented in the book.

For those who enjoy visual learning, this seminar is invaluable, as numerous students ask questions throughout the day, and Tim explains the sequence of trades and how to take it from theory to practice in real-time.

Books 1 & 2, & 3 Pendulum Motion & Golden Speed & Music of the Spheres from Straker's Universal Golden Keys Series in discounted bulk package.

The Lesson on US Steel covered in Part 1 was not the only lesson that Gann wrote to illustrate his trading methods and teach his students how to be profitable in the markets. There are, in fact, a further six lessons, which show the development of Gann’s teaching over a period of nearly 25 years.

The method remains basically the same, but he made discoveries and additions to it. More importantly, his own ability to put his thoughts into words and examples grew over time. I am therefore very excited to announce that I have written a second book, which will complete the exploration of Gann’s mechanical trading method.

All of the trades, including Gann’s own trades, are illustrated by charts, so that they can be easily followed. There are 150 charts in the book. I believe that anyone who studies these lessons of Gann’s studiously will have the tools to improve their own trading performance immeasurably. These lessons are some of the greatest gems of Gann’s work, for they show us how to turn knowledge into profits.

Part 1 of this study provides a detailed analysis of the entire sequence of 322 trades from 1915-1931 presented in W.D. Gann's US Steel trading course, broken down into clear and concise rules for application in today's markets.

Walker dissects Gann's methodology, reveling deeper rules than are apparent in Gann's thin explanations in his original course.

This Gann Trading Course makes an intensive study of one of Gann's core lesson, called The Method for Trading the Overnight Chart. This lesson, is today published as part of the Mechanical Methods & Systems section of his Stock Market Course, and consists of 9 Rules followed by 15 years of trading examples on US Steel.